Ask a question – describe your problem in detail.

Get help from experts on:
    more options

4 minutes

Average Response Time

Channel Not available (No signal)

Hi, I must have clicked something while on the "TV" setting. I switched back to the normal tv channel 73 and all that displays, which it displays on every channel is a blue box that says "Channel not available" and under it "(No signal)" Can you help me?
Anonymous asked this question 2 years ago
  • Ms. FixIt

    Anything you can do I can do better!

    This sounds like a newer HDTV (older TVs rarely say "no signal"), and so the channel that is programmed for TV2 might be 60 (the default). If channel 60 does not work, go to TV1 and press menu->6->1->5 (most receivers) to see what channel the TV2 signal is output on. that's menu->system setup->installation->modulator setup. 60 is the default in air mode, 73 is the default in cable mode.

  • Anonymous Dish Network Expert

    Hi, I am sorry you are having a problem with your TV2. If you think that you changed something on the Tv then I would start there. See if you can cycle through the inpuuts on your Tv. You should be on the TV or Cable input. Then verify you are on channel 73. You can check the modulator as well but if you are still having an issue, please feel free to contact me directly. Thank you!

    Mary Catherine Brady
    Dish Network Customer Support
    Marycatherine.brady@dishnetwork.com
    2:45pm-11:15pm (MST) Tuesday-Saturday

  • supertech

    8+ years hands on install and service tech...

    the easiest fix to this is to go throught he tv's initial setup process. should see it with the normal tv remote in the menu screen. go to setup and then run an auto channel search. this usually fix's this issue.
    hope this helps..
    supertech