Ask a question – describe your problem in detail.

Get help from experts on:
    more options

3 minutes

Average Response Time

None of the listed sceptre codes work for my sceptre x405bv fhdr tv.

None of the listed sceptre codes work for my sceptre x405bv fhdr tv. None control the volume.
Jeff asked this question 3 months ago
  • The Super Tech Solver

    Never give up! Contact me first. Always available and online.

    Jeff, there has often been issues with the Sceptre brand. DirecTV response (not mine) is 'we guarantee our remotes will work with our products, but cannot guarantee they will work with all devices'. My best suggestion is do an internet search under Sceptre DirecTV remote codes.

    6 comments

    12 other experts are backing this answer

    • NeedINFO

      Remote Setup
      How to program the white DIRECTV remote to your TV
      • Look up the control codes for your DIRECTV remote control.
      • Make sure your TV is turned on.
      • Slide the mode switch at top of remote to "TV".
      • Press and hold the MUTE button. This is located above the number 1 button.
      • While still holding down MUTE, press and hold the SELECT button until the
      green light at the top of the remote flashes twice.
      • Enter the first TV code you have. The green light on remote should flash twice.
      • Aim remote at TV and press PWR button once. The TV should power off.
      • Once the TV is able to power off/on and control the volume, slide the mode
      switch at the top of the remote back to the left (DIRECTV). Your remote is now
      • programmed.
      If the TV does not power off, repeat steps 4, 5, 6, and 7, using the next code for your TV.
      If remote control fails to program using all available codes, try scanning for the code.

      How to scan for TV codes on your DIRECTV remote
      • Make sure your TV is turned on.
      • Slide the mode switch at top of remote to "TV".
      • Press and hold the MUTE button. This is located above the number 1 button.
      • While still holding down MUTE, press and hold the SELECT button until green
      light at the top of the remote flashes twice.
      • Then enter 9911, the green light on remote should flash twice.
      • Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP
      button repeatedly until the TV powers off.
      • When the TV powers off, press and release the SELECT button.

      This handy online tool gives you the code you need to set up your remote to control the devices connected to your TV.
      Get your code: : http://www.directv.com/DTVAPP/content/remote_codes

      Our remote controls are guaranteed to program to your DIRECTV receiver, however your TV may not be compatible with our remote control.
    • J

      Jeff

      Thats pretty much all I have found as well. Thanks for the response. I'll do a little further digging and respond again if i find a code that works.
    • NeedINFO

      Jeff, thank you for using DIRECTLY.com... Feel free to ask any questions.... We will do our best to help you!! Thanks again..
    • The Super Tech Solver

      Best of luck and Happy Holiday Jeff. Sorry I didn't have better info.
    • J

      Jeff

      Finally! The very last code on the online remote code guide worked (10000). This code is not listed in the directv program remote settings yet.
    • The Super Tech Solver

      I'll keep a note of it! Nice to have someone willing to help on the other end. Thank you for the review, and enjoy!!