direct tv code for emerson model LC320EMX tv

direct tv code for emerson model LC320EMX tv
gordon asked this question 4 years ago
  • DIRECTV • 1414 answers • 91% helpful


    1 other expert is backing this answer

  • DIRECTV • 110 answers • 88% helpful

    On the direct tv remote itself please press the top button which is the mode button all the way over to tv when asked to program select it. Then look for a your tv brand and use the codes provided until your remote is doing tv functions.
  • DIRECTV • 496 answers • 100% helpful

    The code is 11864, 11394, 10171 or 11963. If those codes dont work check to see what model remote you have because you might need a rc64 or rc 65 model remote. Its at the top left on the remote.
  • DIRECTV • 4377 answers • 92% helpful

    Go to menu, settings, and the remote tab. It will walk you through programming remote from there
  • DIRECTV • 4437 answers • 90% helpful

    How to scan for TV codes on your DIRECTV remote

    Make sure your TV is turned on.
    Slide the mode switch at top of remote to "TV".
    Press and hold the MUTE button. This is located above the number 1 button.
    While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.
    Then enter 9911, the green light on remote should flash twice.
    Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.
    When the TV powers off, press and release the SELECT button.
    Note: If the green light flashes three times before TV responds, then all codes have been cycled through. Our remote controls are guaranteed to program to your DIRECTV receiver; however, your TV may not be compatible with our remote control.

  • 1 Private Answer