I need someone to help me get my dish to show a picture
-
SuperAIRBORNEMan
I've been a tech for Dish Network for 12 years & Directv for 3 years. I also was a Paratrooper (509th)...
Try this, Un-plug ur reciever for 1 minute. Then plug back in and it will re-set itself. Let me know if this helps, if not we can do something else. Thank u
-
Super Dish Installer
Trouble Shooting issues? no problem i can help u with almost anythin.
Make sure you are on the right channel could be 3 or 4 or right imput if you are an the right imput unplug your receiver for 30 seconds and plug it back in let the system reboot it might take up to 10 min for the whole process to be completed if still don't get fix then call dish at 18003333474 to have a tech out.
-
tivosat
expert trainer Dish Network http://www.directly.com/in/tivosat-4 tivosat@hotmail.com 15 year Airforce...
what are you seeing/doing?
-
Field Service Specialist IV
9 + years
first , check to see if your connections on the rcvr is pushed in and tightly secure
if you have a rcvr for 1 tv
take your tv remote and turn it to channel 3 or 4. if no picture then push 'video or source ' on tv remote and cycle thru all the inputs till you see a picture
now if you have a rcvr for 2 tvs.
at 2nd tv, take your tv remote and turn your tv to channel 22 or 60 or 73 or 116. -
Dish Network
Dish Network field serivce manager.
Well without knowing all about your system this is a shoot in the dark. Please call 1800-333-3474 so we can walk you thru steps over the phone.
