Sounds like you receiver is in single mode instead of dual mode, to fix this there is a mode button on the front of you receiver, it may be behind a door. You will also have an amber light on the front... Read entire answer
-
-
for independent viewing, you need a Joey also. Do you have a Joey? Read entire answer
-
after some research, I do not believe that if the HDHR3-US works with dish, it will not have full function because the coax output on dish receivers are standard definition only and would only provide one channel at the time. The HDHR3-US... Read entire answer
-
Robert, Here is a link for wireing diagrams. http://www.mydish.com/support/2-to-2?WT.svl=leftnav Read entire answer
-
the answer to your first question is yes, your old sling will work. but the sling-loaded hopper will work the same while being easier to use Read entire answer
-
brent This is what I have on wing dish http://www.solidsignal.com/pview.asp?mc=02&p=DP... I did hook it to port 4 and port 1 on wing dish hooked directly to receiver from wing dish got 60 percent but know it says wrong sat 119 when hooked... Read entire answer
-
chris, if you check your signal, by pressing menu 6-1-1 and your signal is above 60 you should be ok. 200' is quite long for a satillite run. the amplifier you purchase should support DISeQC (two way communication) and freq range of... Read entire answer
-
First, go to mydish.com you will need your 16 digit acct number your account has to be on auto-pay and you have to be signed up for dish newsletter to qualify. top right corner of home page says login or register click... Read entire answer
-
it is channel 113, however you need to subcribe to americas top 250 to view it Read entire answer
-
press, and hold the TV mode button until all the lights come on, then release (TV mode light will flash) press and release the Power button (TV mode light will be on steady) now press, and release the channel up slowly and... Read entire answer